LOWERS.com - Blank NCR® Brand LaserSnap Carbonless Sheets

SAFE FOR:
	LASER
	INK-JET
	COPY MACHINE
	OFFSET PRESS

Carbonless Paper for Non-Impact Laser or Ink-Jet Printing
NCR® BRAND COLLATED
SUPERIOR CARBONLESS LASERSNAP™

Lowers.com
Green Zone

NCR's ISO 14001
CERTIFICATION

THIS PRODUCT IS AVAILABLE
FROM ALL OF OUR
DROP SHIP ZONES
Reduce your Freight Costs!
Order from the closest location

HAVE CARBONLESS QUESTIONS?

IF YOU WANT THE SAME
PAPER COLOR SEQUENCE
BUT DON'T NEED
THE CARBON ACTION..

Printing Video

Padding Video

Information is valid for All NCR® Papers

MAKE YOUR OWN SNAP-OUT FORMS
PRINTING: When using a Laser or Ink-Jet printer, each sheet is printing individually. After printing, and after the application of the Fanapart padding adhesive, the CB coating will stick to the CF coating. That is why they fall apart into sets when the NCR Fanapart Adhesive is used. Fanapart padding is NOT recommended when a small number of sets are to be printed.

Save
when you purchase a full case and use

CLICK HERE
10 Pkg OF 500 SHEETS = 1 CASE
NO SALES TAX CHARGED ON SALES OUTSIDE
OF CALIFORNIA
(Ask about tax exempt CA Sales)

YOU WILL NEED TO UNDERSTAND
WHY CARBONLESS IS AVAILABLE
IN REVERSE AND FORWARD PAPER COLOR SEQUENCE!
NOT SURE WHICH ONE YOU NEED?

LaserSnap™ Advantages:

LaserSnap™ sheets separate easily to create one continuous, incredibly smooth snap. This clean cut is produced by a precisely tuned laser beam—which means no dust, no burrs and no contamination. Edges remain smooth before and after the snap.
The LaserSnap™ difference is the addition of a 1/2" perforated stub which is available either at the top or the side. When padded, the padded edge of the carbonless sheet can wrinkle a little. With LaserSnap™, the stub is padded and then removed when the form has been completed leaving a clean, flat edge.
If your form has MORE than 2 parts, you can remove copies between the top and bottom sheets without separating the entire set.

LaserSnap™ Disadvantages:

You would need to insure that your printer will feed a a non-standard size sheet.
The perforated stub if feed in first, may cause feeding problems. If you application has the ability to invert the image, some customers feed the sheet bottom first.

# PARTS

SIZE

REVERSE
SEQUENCE