Find an unopened
package of paper. If you look at the label, you will find
an arrow located to the left of the part number that reads
"Print Side Up"
Although you can print on both sides, the arrow indicates
the side of the paper that you must print your primary image.
This is the side that you want the image to carbon down to the
next sheet when you write on it.
Q:
Why is the package labeled REVERSE?
A: The paper has been collated in the reverse order for use
by printers that reverse the paper sequence during printing.
If you turn the paper over, you may solve a sequence problem,
but then you would be printing on the back of the paper and
the carbon action would not work. REMEMBER - The CB transfers
the image to a CF coating.
|